2 files changed, 73 insertions, 0 deletions
diff --git a/pnr/de1_binto7segment/de1_binto7segment_pins.tcl b/pnr/de1_binto7segment/de1_binto7segment_pins.tcl
new file mode 100644
index 0000000..ad20fb6
--- /dev/null
+++ b/pnr/de1_binto7segment/de1_binto7segment_pins.tcl
@@ -0,0 +1,20 @@
+# assign pin locations to a quartus project
+
+#----------------------------------------------------------------------
+# Pin Assignments
+set_location_assignment PIN_L22 -to SW[0]
+set_location_assignment PIN_L21 -to SW[1]
+set_location_assignment PIN_M22 -to SW[2]
+set_location_assignment PIN_V12 -to SW[3]
+set_location_assignment PIN_R20 -to LEDR[0]
+set_location_assignment PIN_R19 -to LEDR[1]
+set_location_assignment PIN_U19 -to LEDR[2]
+set_location_assignment PIN_Y19 -to LEDR[3]
+set_location_assignment PIN_J2 -to HEX0[0]
+set_location_assignment PIN_J1 -to HEX0[1]
+set_location_assignment PIN_H2 -to HEX0[2]
+set_location_assignment PIN_H1 -to HEX0[3]
+set_location_assignment PIN_F2 -to HEX0[4]
+set_location_assignment PIN_F1 -to HEX0[5]
+set_location_assignment PIN_E2 -to HEX0[6]
+# ----------------------------------------------------------------------------
diff --git a/pnr/de1_binto7segment/makefile b/pnr/de1_binto7segment/makefile
new file mode 100644
index 0000000..60faed4
--- /dev/null
+++ b/pnr/de1_binto7segment/makefile
@@ -0,0 +1,53 @@
+## ----------------------------------------------------------------------------
+## Script     : makefile
+## ----------------------------------------------------------------------------
+## Author     : Johann Faerber, Friedrich Beckmann
+## Company    : University of Applied Sciences Augsburg
+## ----------------------------------------------------------------------------
+## Description: This makefile allows automating design flow with Quartus,
+##              it is based on a design directory structure described in 
+##              ../makefile
+## ----------------------------------------------------------------------------
+
+###################################################################
+# Project Configuration: 
+#
+# - assign variable SIM_PROJECT_NAME with the top level project name
+# - add additional VHDL sources to SOURCE_FILES, if necessary
+#
+# Prerequisite: 
+#   - mandatory design directory structure (see end of file)
+#   - assumes file name of top level entity de1_$(PROJECT)_structure.vhd
+###################################################################
+
+SIM_PROJECT_NAME = binto7segment
+PROJECT = de1_$(SIM_PROJECT_NAME)
+
+# Prototype Board FPGA family and device settings
+# DE1
+FAMILY = "Cyclone II"
+DEVICE = EP2C20F484C7
+PROGFILEEXT = sof
+# DEMMK
+# FAMILY = "MAX II"
+# DEVICE = EPM2210F324C3
+# PROGFILEEXT = pof
+# DE2
+#FAMILY = "Cyclone II"
+#DEVICE = EP2C35F484C7
+#PROGFILEEXT = sof
+# DE0
+#FAMILY = "Cyclone IV E"
+#DEVICE = EP4CE22F17C6
+#PROGFILEEXT = sof
+
+# Here the VHDL files for synthesis are defined. 
+include ../../sim/$(SIM_PROJECT_NAME)/makefile.sources
+
+# Add the toplevel fpga vhdl file
+SOURCE_FILES = $(SYN_SOURCE_FILES) \
+../../src/$(PROJECT)_structure.vhd
+
+include ../makefile
+
+