From a04bbf15b0f51696894e37f3e566998108aefd74 Mon Sep 17 00:00:00 2001 From: Johann Faerber Date: Wed, 9 Mar 2022 09:48:43 +0100 Subject: added basic design directory structure --- scripts/modelsim.ini | 351 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 351 insertions(+) create mode 100644 scripts/modelsim.ini (limited to 'scripts/modelsim.ini') diff --git a/scripts/modelsim.ini b/scripts/modelsim.ini new file mode 100644 index 0000000..d3412fe --- /dev/null +++ b/scripts/modelsim.ini @@ -0,0 +1,351 @@ +;; ---------------------------------------------------------------------------- +;; Script : modelsim.ini +;; ---------------------------------------------------------------------------- +;; Author : Johann Faerber +;; Company : University of Applied Sciences Augsburg +;; ---------------------------------------------------------------------------- +;; Description: original version modified +;; - deleted all VHDL and Verilog device libraries +;; - modified compiler standard to VHDL93 = 2008 +;; ---------------------------------------------------------------------------- +;; Revisions : see end of file +;; ---------------------------------------------------------------------------- + +; Copyright 1991-2009 Mentor Graphics Corporation +; +; All Rights Reserved. +; +; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF +; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS. +; + +[Library] +std = $MODEL_TECH/../std +ieee = $MODEL_TECH/../ieee +verilog = $MODEL_TECH/../verilog +vital2000 = $MODEL_TECH/../vital2000 +std_developerskit = $MODEL_TECH/../std_developerskit +synopsys = $MODEL_TECH/../synopsys +modelsim_lib = $MODEL_TECH/../modelsim_lib +sv_std = $MODEL_TECH/../sv_std + +; Altera Primitive libraries +; +; VHDL Section +; +altera_mf = $MODEL_TECH/../altera/vhdl/altera_mf +altera = $MODEL_TECH/../altera/vhdl/altera +altera_lnsim = $MODEL_TECH/../altera/vhdl/altera_lnsim +lpm = $MODEL_TECH/../altera/vhdl/220model +220model = $MODEL_TECH/../altera/vhdl/220model + +[vcom] +; VHDL93 variable selects language version as the default. +; Default is VHDL-2002. +; Value of 0 or 1987 for VHDL-1987. +; Value of 1 or 1993 for VHDL-1993. +; Default or value of 2 or 2002 for VHDL-2002. +; Default or value of 3 or 2008 for VHDL-2008. +VHDL93 = 2008 + +; Show source line containing error. Default is off. +; Show_source = 1 + +; Turn off unbound-component warnings. Default is on. +; Show_Warning1 = 0 + +; Turn off process-without-a-wait-statement warnings. Default is on. +; Show_Warning2 = 0 + +; Turn off null-range warnings. Default is on. +; Show_Warning3 = 0 + +; Turn off no-space-in-time-literal warnings. Default is on. +; Show_Warning4 = 0 + +; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on. +; Show_Warning5 = 0 + +; Turn off optimization for IEEE std_logic_1164 package. Default is on. +; Optimize_1164 = 0 + +; Turn on resolving of ambiguous function overloading in favor of the +; "explicit" function declaration (not the one automatically created by +; the compiler for each type declaration). Default is off. +; The .ini file has Explicit enabled so that std_logic_signed/unsigned +; will match the behavior of synthesis tools. +Explicit = 1 + +; Turn off acceleration of the VITAL packages. Default is to accelerate. +; NoVital = 1 + +; Turn off VITAL compliance checking. Default is checking on. +; NoVitalCheck = 1 + +; Ignore VITAL compliance checking errors. Default is to not ignore. +; IgnoreVitalErrors = 1 + +; Turn off VITAL compliance checking warnings. Default is to show warnings. +; Show_VitalChecksWarnings = 0 + +; Keep silent about case statement static warnings. +; Default is to give a warning. +; NoCaseStaticError = 1 + +; Keep silent about warnings caused by aggregates that are not locally static. +; Default is to give a warning. +; NoOthersStaticError = 1 + +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn off "Loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on some limited synthesis rule compliance checking. Checks only: +; -- signals used (read) by a process must be in the sensitivity list +; CheckSynthesis = 1 + +; Activate optimizations on expressions that do not involve signals, +; waits, or function/procedure/task invocations. Default is off. +; ScalarOpts = 1 + +; Require the user to specify a configuration for all bindings, +; and do not generate a compile time default binding for the +; component. This will result in an elaboration error of +; 'component not bound' if the user fails to do so. Avoids the rare +; issue of a false dependency upon the unused default binding. +; RequireConfigForAllDefaultBinding = 1 + +; Inhibit range checking on subscripts of arrays. Range checking on +; scalars defined with subtypes is inhibited by default. +; NoIndexCheck = 1 + +; Inhibit range checks on all (implicit and explicit) assignments to +; scalar objects defined with subtypes. +; NoRangeCheck = 1 + +[vlog] + +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn off "loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on Verilog hazard checking (order-dependent accessing of global vars). +; Default is off. +; Hazard = 1 + +; Turn on converting regular Verilog identifiers to uppercase. Allows case +; insensitivity for module names. Default is no conversion. +; UpCase = 1 + +; Turn on incremental compilation of modules. Default is off. +; Incremental = 1 + +; Turns on lint-style checking. +; Show_Lint = 1 + +[vsim] +; Simulator resolution +; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100. +Resolution = ns + +; User time unit for run commands +; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the +; unit specified for Resolution. For example, if Resolution is 100ps, +; then UserTimeUnit defaults to ps. +; Should generally be set to default. +UserTimeUnit = default + +; Default run length +RunLength = 100 + +; Maximum iterations that can be run without advancing simulation time +IterationLimit = 5000 + +; Directive to license manager: +; vhdl Immediately reserve a VHDL license +; vlog Immediately reserve a Verilog license +; plus Immediately reserve a VHDL and Verilog license +; nomgc Do not look for Mentor Graphics Licenses +; nomti Do not look for Model Technology Licenses +; noqueue Do not wait in the license queue when a license isn't available +; viewsim Try for viewer license but accept simulator license(s) instead +; of queuing for viewer license +; License = plus + +; Stop the simulator after a VHDL/Verilog assertion message +; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal +BreakOnAssertion = 3 + +; Assertion Message Format +; %S - Severity Level +; %R - Report Message +; %T - Time of assertion +; %D - Delta +; %I - Instance or Region pathname (if available) +; %% - print '%' character +; AssertionFormat = "** %S: %R\n Time: %T Iteration: %D%I\n" + +; Assertion File - alternate file for storing VHDL/Verilog assertion messages +; AssertFile = assert.log + +; Default radix for all windows and commands... +; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned +DefaultRadix = symbolic + +; VSIM Startup command +; Startup = do startup.do + +; File for saving command transcript +TranscriptFile = transcript + +; File for saving command history +; CommandHistory = cmdhist.log + +; Specify whether paths in simulator commands should be described +; in VHDL or Verilog format. +; For VHDL, PathSeparator = / +; For Verilog, PathSeparator = . +; Must not be the same character as DatasetSeparator. +PathSeparator = / + +; Specify the dataset separator for fully rooted contexts. +; The default is ':'. For example, sim:/top +; Must not be the same character as PathSeparator. +DatasetSeparator = : + +; Disable VHDL assertion messages +; IgnoreNote = 1 +; IgnoreWarning = 1 +; IgnoreError = 1 +; IgnoreFailure = 1 + +; Default force kind. May be freeze, drive, deposit, or default +; or in other terms, fixed, wired, or charged. +; A value of "default" will use the signal kind to determine the +; force kind, drive for resolved signals, freeze for unresolved signals +; DefaultForceKind = freeze + +; If zero, open files when elaborated; otherwise, open files on +; first read or write. Default is 0. +; DelayFileOpen = 1 + +; Control VHDL files opened for write. +; 0 = Buffered, 1 = Unbuffered +UnbufferedOutput = 0 + +; Control the number of VHDL files open concurrently. +; This number should always be less than the current ulimit +; setting for max file descriptors. +; 0 = unlimited +ConcurrentFileLimit = 40 + +; Control the number of hierarchical regions displayed as +; part of a signal name shown in the Wave window. +; A value of zero tells VSIM to display the full name. +; The default is 0. +; WaveSignalNameWidth = 0 + +; Turn off warnings from the std_logic_arith, std_logic_unsigned +; and std_logic_signed packages. +; StdArithNoWarnings = 1 + +; Turn off warnings from the IEEE numeric_std and numeric_bit packages. +; NumericStdNoWarnings = 1 + +; Control the format of the (VHDL) FOR generate statement label +; for each iteration. Do not quote it. +; The format string here must contain the conversion codes %s and %d, +; in that order, and no other conversion codes. The %s represents +; the generate_label; the %d represents the generate parameter value +; at a particular generate iteration (this is the position number if +; the generate parameter is of an enumeration type). Embedded whitespace +; is allowed (but discouraged); leading and trailing whitespace is ignored. +; Application of the format must result in a unique scope name over all +; such names in the design so that name lookup can function properly. +; GenerateFormat = %s__%d + +; Specify whether checkpoint files should be compressed. +; The default is 1 (compressed). +; CheckpointCompressMode = 0 + +; List of dynamically loaded objects for Verilog PLI applications +; Veriuser = veriuser.sl + +; Specify default options for the restart command. Options can be one +; or more of: -force -nobreakpoint -nolist -nolog -nowave +; DefaultRestartOptions = -force + +; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs +; (> 500 megabyte memory footprint). Default is disabled. +; Specify number of megabytes to lock. +; LockedMemory = 1000 + +; Turn on (1) or off (0) WLF file compression. +; The default is 1 (compress WLF file). +; WLFCompress = 0 + +; Specify whether to save all design hierarchy (1) in the WLF file +; or only regions containing logged signals (0). +; The default is 0 (save only regions with logged signals). +; WLFSaveAllRegions = 1 + +; WLF file time limit. Limit WLF file by time, as closely as possible, +; to the specified amount of simulation time. When the limit is exceeded +; the earliest times get truncated from the file. +; If both time and size limits are specified the most restrictive is used. +; UserTimeUnits are used if time units are not specified. +; The default is 0 (no limit). Example: WLFTimeLimit = {100 ms} +; WLFTimeLimit = 0 + +; WLF file size limit. Limit WLF file size, as closely as possible, +; to the specified number of megabytes. If both time and size limits +; are specified then the most restrictive is used. +; The default is 0 (no limit). +; WLFSizeLimit = 1000 + +; Specify whether or not a WLF file should be deleted when the +; simulation ends. A value of 1 will cause the WLF file to be deleted. +; The default is 0 (do not delete WLF file when simulation ends). +; WLFDeleteOnQuit = 1 + +; Automatic SDF compilation +; Disables automatic compilation of SDF files in flows that support it. +; Default is on, uncomment to turn off. +; NoAutoSDFCompile = 1 + +[lmc] + +[msg_system] +; Change a message severity or suppress a message. +; The format is: = [,...] +; Examples: +; note = 3009 +; warning = 3033 +; error = 3010,3016 +; fatal = 3016,3033 +; suppress = 3009,3016,3043 +; The command verror can be used to get the complete +; description of a message. + +; Control transcripting of elaboration/runtime messages. +; The default is to have messages appear in the transcript and +; recorded in the wlf file (messages that are recorded in the +; wlf file can be viewed in the MsgViewer). The other settings +; are to send messages only to the transcript or only to the +; wlf file. The valid values are +; both {default} +; tran {transcript only} +; wlf {wlf file only} +; msgmode = both + +;; ---------------------------------------------------------------------------- +;; Revisions: +;; ---------- +;; $Id:$ +;; ---------------------------------------------------------------------------- -- cgit v1.2.3