moved project to blinky

1 files changed, 40 insertions, 0 deletions

diff --git a/blinky/.cargo/config.toml b/blinky/.cargo/config.toml
new file mode 100644
index 0000000..5234c74
--- /dev/null
+++ b/blinky/.cargo/config.toml
@@ -0,0 +1,40 @@
+#
+# Cargo Configuration for the https://github.com/rp-rs/rp-hal.git repository.
+#
+# Copyright (c) The RP-RS Developers, 2021
+#
+# You might want to make a similar file in your own repository if you are
+# writing programs for Raspberry Silicon microcontrollers.
+#
+# This file is MIT or Apache-2.0 as per the repository README.md file
+#
+
+[build]
+# Set the default target to match the Cortex-M0+ in the RP2040
+target = "thumbv6m-none-eabi"
+
+# Target specific options
+[target.thumbv6m-none-eabi]
+# Pass some extra options to rustc, some of which get passed on to the linker.
+#
+# * linker argument --nmagic turns off page alignment of sections (which saves
+#   flash space)
+# * linker argument -Tlink.x tells the linker to use link.x as the linker
+#   script. This is usually provided by the cortex-m-rt crate, and by default
+#   the version in that crate will include a file called `memory.x` which
+#   describes the particular memory layout for your specific chip. 
+# * no-vectorize-loops turns off the loop vectorizer (seeing as the M0+ doesn't
+#   have SIMD)
+rustflags = [
+    "-C", "link-arg=--nmagic",
+    "-C", "link-arg=-Tlink.x",
+    "-C", "no-vectorize-loops",
+]
+
+# This runner will make a UF2 file and then copy it to a mounted RP2040 in USB
+# Bootloader mode:
+runner = "elf2uf2-rs -d"
+
+# This runner will find a supported SWD debug probe and flash your RP2040 over
+# SWD:
+# runner = "probe-rs run --chip RP2040"
\ No newline at end of file